Titanium Alloy GR5 Soot Blower Diaphragm

Brand Name : DDTI Origin : BaoJi China
Certification : ISO9001:2008 ISO13485:2003
Payment Terms : L/C, T/T, Western Union
Material : TC4(GR5)、gr2/TA2
Surface : Pickling or sandblasting
Supply Ability : 10000pcs per mouth
Application: mainly used in power plant dust soot blowers,
Specification Diameter: 149-250mm,Thickness:1.5,1.6,1.8,2.0 mm
Packaging Details : Each piece is wrapped in wrapping paper and then packed in carton or wooden box.
Product description


1. product brief introduction

Titanium alloy soot blower diaphragm is mainly used for soot blower in power plant, and special used for other sonic soot blower in the device  which need dust removal.

Technical requirements: Flat surface, smooth, lathe polishing around, the thickness and diameter tolerance can be customized.

Surface treatment process: acid pickling, air brush, polishing.

MOQ: 20-30pcs

2. The product specification

Thickness: 1.4/1.5/1.6/1.8/2.0mm

Diameter: 150-240mm

The above is commonly used specification, the required specifications can be customized according to the requirements of customers, and also can be processed according to the drawings.

3. Our advantages

High grade:

Our company's high-grade diaphragm price is 800-900 pieces. This process can completely replace the imported parts (imported parts: 1200-1300 yuan/piece) to ensure the service life is more than 3-5 years. Flexible specifications can be customized according to the customer's specific size).

For the quality and price aspects of the customer's question, the main answer is: Brief description of both the material and the process.

1. The problem of unvoiced

A: There are two main reasons for this. On the one hand, the customer may use a pure titanium plate, because the pure titanium itself has insufficient strength and elastic modulus, only 400, and(Gr5) TC4 is 800, so it will not be able to play. Can't blow it. There is not enough positive surface, poor sealing can also cause a bad seal, side leakage will not sound.

2. Reasons for price differences

A: On the one hand, it is the difference in material selection. On the other hand, it is the difference in processing technology.

3. Processing technology: 

The customers themselves do is use the bought board to cut the film, some will do some simple processing, and some will be sold directly into the sootblower, so that it is sure to happen from time to time.

Our company's production process is: using the TC4 board for export to cut through the water cut into round → edge grinding → surface grinding, need pickling, sandblasting grinding, mirror, so that the installation of the contact surface. High-end needs to be placed in the press for more than 48 hours for leveling to ensure the flatness of the diaphragm.

High-grade: all the processing technology has a price between 600-800, the service life of 3-5years

Mid-range: The production process has been reduced, the use period is approximately 2-3 years, 300-400 yuan

If you are interested in our products, please send an email:export@bjddt.com

Hot Tags: Titanium Alloy GR5 Soot Blower Diaphragm, China, company, products
Related Products

Copyright © Baoji Dingding Titanium Products Co.,LtdTel: +86-917-3412107