Industry Knowledge

Home > News > Content
Dental Zirconia Sintering Furnace Dental CAD Cam Milling Tool Heating Element Dental Lab Equipment
Sep 15, 2016

Basic Info

Model NO.:TDF001Material:Zirconia,Titanium, PMMA, Wax,Co-Cr,Nicr, Resin
3-Point Bending Strength:1200-/+50MPa, 3-Point Bending Strength, Cold IsostThickness:10/12/14/16/18/20/22/25mm,White, Preshaded, Multil
Sintering Dentsity:6.07-6.09g/cm3 Sintering Dentsity,2.5ug*Cm2 ChemicApplication:Crown,Coping,Bridge,Full Contour,Inlays, Onlays, V
Certification:CE, FDA, ISO 13356,100% Compatible, 100% BiocompatRaw Material:Fine Nano Zirconia Powder,Resin Wax,Titanium,Nicr,
Products:Dental CAD Cam Material, Milling Bur, Sintering FuTransparency:High Translucent, Super Translucent, Strength, Ice
Compatible:Amann Girrbach,Wieland,Roland,VHF,Imes-Icores,Orig


This dental zirconia sintering furnace  is mainly used for the sintering of Zirconia materials and also can be used in the field of powder metallurgical for the high temperature sintering and annealing of the meterials. 
 
 
 
Product Description
  The features of the dental zirconia sintering furnace: dental furnace / ceramic sintering furnace 
1. Round heating chamber to make sure the temperature uniformity inside.
2. Pure type MoSi2 rods will not contaminants the heated dentures .
3. Touch screen controller and lift tray for easy operation.
4. High temperature accuracy of 1 C.
5. 30 steps heating curves can be kept and programmable.
 
The technical parameters of 1700ºC dental Ziconia Sintering Furnace / dental lab furnace
 


1

Model

TDF-1700-12T

2

Chamber model

lift tray

3

Display

Touch screen LCD

4

Limiting Temperature

1700ºC

5

Usable Range

≤1600ºC

6

Heating Rate

Suggestion0~20ºC/min

7

Temperature Zone

Single

8

Accuracy

±1ºC

9

Inside Chamber Size

Φ120×120mm

10

Heating Element

MoSi2

11

Thermocouple

B Type

12

Max. Power

1.8KW

13

Working Voltage

AC 208V-240V single phase, 50/60 Hz

14

Temperature Control

PID automatic control via SCR power control

15

Heating curves

50steps programmable

16

Communication interface

Rs485

17

Outside Size

400×530×850(mm)

18

Weight

85kg

19

Warranty

One year limited warranty (Consumable parts
such as heating elements are not covered by
the warranty)



Our Services
 All kinds raw material for dental cadcam milling:
1, milling burs for cadcam milling system;
2, zirconia blocks for overlay copping and full contour bridge;
3,wax for burnout;
4,PMMA for temporary denture;
5,Titanium & Cocr blank for cad cam milling;
6,dental alloy;
7,Polisher & grinder; 
8,Disposable material for dental lab;
9,Equipments for dental clinic, and so on. 

 




Copyright © Baoji Dingding Titanium Products Co.,LtdTel: +86-917-3412107